Diagnosing the Cause of Dim Lights/Low Light Output
We recommend following the steps below when attempting to diagnose the cause of dim lights/low light output:
- Replace the lamp with another brand to see if you get the same results. If you get the same results, proceed to the next step.
- Check voltage supply to see if there is low voltage.
- If on multi-tap ballast, verify if the electrical connection is on the proper voltage tap.
- Check for loose electrical connection on the capacitors. Verify capacitor is wired properly within the circuit.
- If your low light output problem persists, the cause is probably a defective or incorrect capacitor. Replace your capacitor.
